Specifications
| 8018Gt | 8018Gt-PWM | |
|---|---|---|
| Motor type | 3-phase DC brushless | |
| Rated voltage[V] | 24 | |
| Flow rate[L/min] | 2.0 | |
| Discharge pressure range[kPa] | 0～+170 | |
| Suction pressure range[kPa] | -75～0 | |
| Contact material | 8018Gt | 8018Gt-PWM |
| Valve | FKM | |
| Diaphragm | FKM | |
| Others | POM, FKM, SUS, Ni, Urethane | |
| Use condition | 8018Gt | 8018Gt-PWM |
| Ambient temperature range[℃] | +5～+50 | |
| Fluid temperture[℃] | +5～+50 | |
Electrical connections
| Lead wire | 8018Gt | 8018Gt-PWM | |||
|---|---|---|---|---|---|
| Red | Vcc | 8～26V | |||
| Black | GND | GND | |||
| Blue | PWM | - | Base frequency： 50kHz max Recommended value： 20kHz Low level： 0～1[V] Hi level： 2～5[V] |
||
| White | FG | 3pulse/rev (Vp-p=5V) | |||
Options
| 8018Gt | 8018Gt-PWM | |
|---|---|---|
| PWM control | - | 〇 |
(1)The values listed in this document are measured at an ambient temperature of 25℃, using a urethane tube with an inner diameter of 4mm (outer diameter 6mm) and a length of 10cm, based on Orbray standard measurement system.
(2)The specifications may be changed slightly depending on the options selected.
Specification charts
